MICROMAX A25 CLOCKWORKRECOVERY

How to install CWM recovery:

Follow the steps :

1. Download SPFlashTool and extract it.

2. Extract CWMR_6003_A25_droidtricksqvga.zip

3. Run Flash_tool.exe.

4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
(don't click PRELOADER" & "DSP_BL)


5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...

6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).

7. Now, Click "Download" in SPFlashTool.

8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.

9. You are done. Disconnect usb.

10. Boot into recovery through 3-button combo (Volume Up + Home + Power).

11. Your CWMR is flashed


Download Sp Flash Tool
(updated)

Back To Stock Recovery :




You Might Also Like :

[Vision V2.0]Update Micromax A25 Custom Rom

[Vision V1.0]Custom Rom For Micromax A25

116 comments

I have successfully flashed CWM recovery..

Reply

Please reupload the sp flash tool. it is corrupted. i can't unzip it. plz, do it as soon as u can :)

Reply

It shows an error: "partition size changed". What should I do?

Reply

in which step "partion size changed" shows.

Reply

have you flashed cwm ? If flashed then install a pre-rooted custom rom.

Reply

For firmware version A25_0201_V0409 it shows "partion size changed error 16008 in sp flash tool while click the download button . I've disable the dwnld all .
Please help me!!

Reply

To check firmware version setting>others>about phone>sw version

Reply

wait...I am checking it

Reply

cant find usb drive.....plz help
my fon shows charging bt pc dsnt show and said NO DRIVE FOUND....plz help

Reply

go to device manager and install

Reply

Also, can you upload the stock firmware for A25_0201_V0409?

Reply

Any solution for my problem yet? Or please give me the stock firmware of A25_0201_V0409.

Reply

what is device manager and how to find/install it?

Reply

right click my computer and then click device device manager located in left side,

Reply

Please help me, what is the problem? when i am click download button then show a message "Downloade warning" not all images are correctly loaded. Why it happens please help me.

Reply

tipu ji i have tried this a lot but sp flash tool is not showing any type of dialog box after clicking download and attaching my usb to my pc !!!!!! please help me

Reply

plz install driver correctly then your sp tool works perfectly

Reply

I am getting an unknown error i wish u could help me with this
ERROR 16008

http://s17.postimg.org/vrhwo8d67/20130424_034617.jpg

here is its screen shot

Reply

did you disabled da download all...If error persists then install driver again and restart your PC then try

Reply

sir it says pertition size changed

Reply

most of the users having same problem.....but you can solve this by reinstalling MTK device driver

Reply

same error plz help
my s/w ver:- A25_0201_v0370

Reply

follow : http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html

Reply

pls upload a video

Reply

when i click downlaod in spflash tool then it showed no usb port inserted but i have already inserted
it showed that you might have not download the usb driver but i have already downloaded what to do i can't know please tell me

Reply

follow this post http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html

Reply

tipu ji help same error reinstalled drivers still same error :/

Reply

which version of windows 7 are u using.....32bit/64bit

Reply

windows 7 32 bit sir same error in rooting also what to do plz help

Reply

thanks that help me i am replying after 2 days my phone is rooted and now i cannot switch on my phone do you think restoring the backup that i did in cwm recovery would help me to get the back

Reply

Help me tipu ji plz unable to root and install CWM and 1 question hai CWM install k liye root karna imp hai kya ??

Reply

Tipu bhai solution for error?????????

Reply

plz try in a fresh PC or freshly formated windows(where your a25 have never connected)

Reply

tried not working :/

Reply

man flashed it, but how to root it from recovery mode?!

Reply

http://droidtricksqvga.blogspot.in/2013/03/easiest-way-to-root-micromax-a25.html

Reply

sp flash tool error (8100)
android usb ) can not find isb port
pls help..

Reply

tipu bhai any solution for partition size changed error???? pz help me

Reply

Hi this is Bhaskar. I hv downloaded Micromax a25 driver rar file from its official site. Its 8.45mb in size.. plz tell me how can I install this driver in windows 7? Do I require internet connection to install this driver..?? Thanks in advance

Reply

did u follow my this "how to install MTK device driver" post, if not then plz follow http://droidtricksqvga.blogspot.com/2013/04/how-to-install-mtk-driver-in-windows.html

Reply

Yes, bt didn't find all the options in usb deview.. like hub 0004# ..

Reply

I dnt hv any idea abt android .. I just wanna know that can u make a singed custom rom for this handset, so that we will b able to install it by its stock recovery ... and as ur rom is prerooted then we could easily root it.. is it possible?

Reply

Thank u . Frankly speaking I hv no idea, by reading ur all the post, this idea came to my mind. I dnt know its possible or nt, if possible then plz make a signed rom. I wl b very helped..

Reply

tipu sir my phone is mmx a25 i installed sp flash tool when i inserted the usb it said sp flash error 8100 now i went to control panel and to device manager but there was no device it was saying that failed to install plz plz help

Reply

did u follow my mtk driver installation guide :
http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html

Reply

nooo....my driver is kk...but when i tap on power off the device it is actually gone from the computer i mean the software is not there at all....what to do u only tel mee

Reply

Tipu Sir can i upgrade my android version 2.3 to 4.0 in micromax a25 plz help and sir jelly bean version kab upload kar rahe hai ....................

Reply

for jelly bean os 512mb ram is required. So it is not possible

Reply

hey the sp flash tool dosent starts its download
i have tried other sp flash tool its showing the same
can u please tellme what is my fault or any other technique to enable cmw recowery
plzzz reply

Reply

there is no other technique for cwm recovery...BDW ...First install driver for a25.....

Reply

sir i have install the drivers

Reply

tipu sir i have enabled the cmw recovery mode succesfully
but my mobile is noy getting started it is showing
"micromax a25|smarty" and it is not proceediing ahead its process
but the cmw recovery is opening correctly without any fault
when i am installing u r rom it is saying installation aborted
when i was enabling cmw recovery mode i have ticked on recovery & booting and attached the recovery disc file to booting
plzzzzz tell me what is my fault
and plzzz tell how can i make my mobile how it was
plzzz plzzz plzzz reply

Reply

I did't knw wht fault u hv done during flashing.......Your CWM recovery is live,,,,,so there is no problem...u can install any rom or cwm backup i.e. nandroid bacup..

Reply

sir i dont have anybackup so can u please give me a backup file

Reply

Plz download my [Modded]Micromax A25 Stock which is nandroid backup

Reply

Sir micromax-a27-clockworkrecovery Kaise Hoge........... Sir plz Help

Reply

sir i have tried installing it but it is showing installlation aborted
my mobile is sitll not working
plzzzz help

Reply

tipu sir i am unable to extract clockwork.7z file using 7zip
it is showing error
plzzz help

Reply

Did u download all files?

Reply

WHAT TO DO AFTER DOWNLOADING ALL FILES

Reply

extract file no.1( remaining files will be automatically extracted)

Reply

sir i am unable to extract the files can u plz provide the extracted file on my email id :-vivekkamble1000@gmail.com

Reply

nandroid is around 600mb, not possible to upload..........BDW download all files and use 7zip. then extract clokwork.001.7zip file..

Reply

sir so can u plz upload a tutorial video of extractong the files and installing the stock rom

Reply

sir when i download u rall files and extract it it get a clockword file of 234mb but u said that it contains 600 mb i have tried this process 3 times whats my fault
plzzz help

Reply

the " step 8: Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool."
not working on my laptop why ???
i haven some trouble pls help me plzzz......????
subhu.thirus@gmail.com this is my mail id

Reply

sir when i download u r all files and extract it i get a clockword file of 234mb but u said that it contains 600 mb i have tried this process 3 times whats my fault
plzzz help

Reply

may be u did not extract successfully....

Reply

In this week i will upload flashable stock rom for a25

Reply

sir when r u uploading the new stock rom
and is it a nandroid backup plz reply

Reply

no......it is not nandroid backup....it is stock rom.....i will upload in this week

Reply

tipu sir..i read ur post about sp flash tool 8100 error..i tried installing my drivers again using pdanet n dat usb deview..bt still d error occurs when i click download..plz help..m stuck

Reply

tipu sir plz reply asap.. :(

Reply

sir so hw can i repair u r mobile
plzzzz help......

Reply

Tipu sir, I can access the Clockworkrecovery by pressing volume up+power button, but I didn't do anything with SpFlash tool.

Reply

tomorrow i will upload stock rom

Reply

use another version of sp flash tool.....

Reply

can that stock rom can repair my mobile.....

Reply

tipu sir r u going to upload the stock rom......
and this rom can repair my mobile plzzz reply fast.....

Reply

@ Vivek Kamble: bro try this link..

http://droidtricksqvga.blogspot.com/2013/04/micromax-a25-stock-rom.html

Reply

WILL SP FLASH TOOL WORK ON WINDOWS XP

Reply

yes it will work
and mow my mobileis working perfectly
thanks to the anonymous and tipu sir....
thank you......

Reply

@ VIVEK KAMBLE: Your Welcome Bro..

Reply

plzz... give me the link for the new stock rom

Reply

http://droidtricksqvga.blogspot.in/2013/04/micromax-a25-stock-rom.html?showComment=1373778686553#c5619771920145754442

Reply

Tipu bhai i still cant install this cwm it says partion erroe in the sp tool plz help me i m eagerly waiting to use ur cutom rom for a25


thanks in advance

Reply

hav u installed all drivers for it?

Reply

Tipu sir when I try to connect my mobile it shows Eboot error . Installed the drivers in my pc
Using windows 8. Plzzzzzzzzzzzzzzzzzzzz help as bcoz I m xcited 2 use ur vision

Reply

Hello Tipu, I have tried the way and it recognized my device but showed an error - 16008,"Partition size changed!". please help.

Reply

i have tried in win8.....plz try it on win7

Reply

did u disable da download all?

Reply

I do not have win 7 plzzzzzz help me tipu sirrr I need 2 flash cwm recovery to flash custom roms

Reply

did u follow my driver installation procedure???
http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html...........If not then plz follow and try again

Reply

sir i use Ur all methods but not success . partition error still. i install driver ur mathod . but problem still. i use windows server 2003, XP, windows 7 32 bit. but problem not solved. pls give me any suggestion for " Partition size chenged " error.
PLEASE HELP ME.

Reply

Please mail me on mayur.mahajan7@gmail.com

Reply

Ya I have followed the steps still the same I even disabled da download all but then also showing Eboot error partition size changed

Reply

tipu sir please help... my micromax a25 is not getting flashed it is saying partition size change please elaborate here or at my email manvijvasu@gmail.com

Reply

tipu bhai please solve my problem. i use win xp, win 7 also win 8 (all 32 bit) " Partition size changed " error still. please help me. i tried all methods but not rooted successfully. please give me solution please please please. my email id is mayur.mahajan7@gmail.com

Reply

not booting into recovery stucked on boot screen

Reply

are yaar "DA Download" ko disable aur enable dono kar k dekh liya fir bhi ye process nahi ho raha aur drives bhi install kar rakhe hai, kya karu ab ??

Reply

CWM Installation For Rooted A25:
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...

Here is the link for cwm recovery.zip & mobileuncle tools.apk ...

http://forum.xda-developers.com/showthread.php?p=37281894

Reply

Phone rooted na ho to kya karu....??
Ye flash ka process kese hoga ??

Reply

Brother, how many time need to recovery cwm by mobileuncle tool, please anybody help me. I have rooted but my cwm doesn't work. What can i do now? And i also delete my setting file from root. Please if any one know replay me on princepeal@gmail.com

Reply

I have flashed cwmr in my micromax A25. but i cant get to normal mode after that. when i reboot to normal mode it stuck with the micromax logo and i cannot get back to normal mode. I tried many times, but i cant get back to my normal mode. Can anyone help me to solve this issue?

Reply

shit. when i click "download" it shows "Not ALL images are correctly loaded, which may cause boot up issue! Do you still want to go on downloading anyway?" what to do?

Reply

Micromax a25 not update signature verification failed how update

Reply

Post a Comment