How to install CWM recovery:
Follow the steps :1. Download SPFlashTool and extract it.
2. Extract CWMR_6003_A25_droidtricksqvga.zip
3. Run Flash_tool.exe.
4. Load scatter file extracted from CWMR_6003_A25.zip and you will see "recovery" ticked.
(don't click PRELOADER" & "DSP_BL)
5. Then, goto "Options" --> "DA Download All" --> Click on "Disable DA Download All". Now, you are ready to flash recovery...
6. Turn off your phone. Remove battery for some seconds. Put battery and attach usb cable to phone(don't turn on phone).
7. Now, Click "Download" in SPFlashTool.
8. Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool.
9. You are done. Disconnect usb.
10. Boot into recovery through 3-button combo (Volume Up + Home + Power).
11. Your CWMR is flashed
116 comments
I have successfully flashed CWM recovery..
ReplyPlease reupload the sp flash tool. it is corrupted. i can't unzip it. plz, do it as soon as u can :)
ReplyIt shows an error: "partition size changed". What should I do?
Replyin which step "partion size changed" shows.
Replyhave you flashed cwm ? If flashed then install a pre-rooted custom rom.
ReplyFor firmware version A25_0201_V0409 it shows "partion size changed error 16008 in sp flash tool while click the download button . I've disable the dwnld all .
ReplyPlease help me!!
To check firmware version setting>others>about phone>sw version
Replywait...I am checking it
Replycant find usb drive.....plz help
Replymy fon shows charging bt pc dsnt show and said NO DRIVE FOUND....plz help
go to device manager and install
ReplyAlso, can you upload the stock firmware for A25_0201_V0409?
Replyok
ReplyAny solution for my problem yet? Or please give me the stock firmware of A25_0201_V0409.
Replywhat is device manager and how to find/install it?
Replyright click my computer and then click device device manager located in left side,
Replyok
ReplyPlease help me, what is the problem? when i am click download button then show a message "Downloade warning" not all images are correctly loaded. Why it happens please help me.
Replytipu ji i have tried this a lot but sp flash tool is not showing any type of dialog box after clicking download and attaching my usb to my pc !!!!!! please help me
Replyplz install driver correctly then your sp tool works perfectly
Replypress yes button
ReplyI am getting an unknown error i wish u could help me with this
ReplyERROR 16008
http://s17.postimg.org/vrhwo8d67/20130424_034617.jpg
here is its screen shot
did you disabled da download all...If error persists then install driver again and restart your PC then try
Replysir it says pertition size changed
Replymost of the users having same problem.....but you can solve this by reinstalling MTK device driver
Replysame error plz help
Replymy s/w ver:- A25_0201_v0370
follow : http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html
Replypls upload a video
Replywhen i click downlaod in spflash tool then it showed no usb port inserted but i have already inserted
Replyit showed that you might have not download the usb driver but i have already downloaded what to do i can't know please tell me
follow this post http://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html
Replytipu ji help same error reinstalled drivers still same error :/
Replywhich version of windows 7 are u using.....32bit/64bit
Replywindows 7 32 bit sir same error in rooting also what to do plz help
Replythanks that help me i am replying after 2 days my phone is rooted and now i cannot switch on my phone do you think restoring the backup that i did in cwm recovery would help me to get the back
ReplyHelp me tipu ji plz unable to root and install CWM and 1 question hai CWM install k liye root karna imp hai kya ??
Replynahi
Replyyes.....
ReplyTipu bhai solution for error?????????
Replyplz try in a fresh PC or freshly formated windows(where your a25 have never connected)
Replytried not working :/
Replyman flashed it, but how to root it from recovery mode?!
Replyhttp://droidtricksqvga.blogspot.in/2013/03/easiest-way-to-root-micromax-a25.html
Replysp flash tool error (8100)
Replyandroid usb ) can not find isb port
pls help..
tipu bhai any solution for partition size changed error???? pz help me
ReplyHi this is Bhaskar. I hv downloaded Micromax a25 driver rar file from its official site. Its 8.45mb in size.. plz tell me how can I install this driver in windows 7? Do I require internet connection to install this driver..?? Thanks in advance
Replydid u follow my this "how to install MTK device driver" post, if not then plz follow http://droidtricksqvga.blogspot.com/2013/04/how-to-install-mtk-driver-in-windows.html
ReplyYes, bt didn't find all the options in usb deview.. like hub 0004# ..
ReplyI dnt hv any idea abt android .. I just wanna know that can u make a singed custom rom for this handset, so that we will b able to install it by its stock recovery ... and as ur rom is prerooted then we could easily root it.. is it possible?
Replyok, i will do
ReplyThank u . Frankly speaking I hv no idea, by reading ur all the post, this idea came to my mind. I dnt know its possible or nt, if possible then plz make a signed rom. I wl b very helped..
Replytipu sir my phone is mmx a25 i installed sp flash tool when i inserted the usb it said sp flash error 8100 now i went to control panel and to device manager but there was no device it was saying that failed to install plz plz help
Replydid u follow my mtk driver installation guide :
Replyhttp://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html
nooo....my driver is kk...but when i tap on power off the device it is actually gone from the computer i mean the software is not there at all....what to do u only tel mee
ReplyTipu Sir can i upgrade my android version 2.3 to 4.0 in micromax a25 plz help and sir jelly bean version kab upload kar rahe hai ....................
Replyfor jelly bean os 512mb ram is required. So it is not possible
Replyhey the sp flash tool dosent starts its download
Replyi have tried other sp flash tool its showing the same
can u please tellme what is my fault or any other technique to enable cmw recowery
plzzz reply
there is no other technique for cwm recovery...BDW ...First install driver for a25.....
Replysir i have install the drivers
Replytipu sir i have enabled the cmw recovery mode succesfully
Replybut my mobile is noy getting started it is showing
"micromax a25|smarty" and it is not proceediing ahead its process
but the cmw recovery is opening correctly without any fault
when i am installing u r rom it is saying installation aborted
when i was enabling cmw recovery mode i have ticked on recovery & booting and attached the recovery disc file to booting
plzzzzz tell me what is my fault
and plzzz tell how can i make my mobile how it was
plzzz plzzz plzzz reply
I did't knw wht fault u hv done during flashing.......Your CWM recovery is live,,,,,so there is no problem...u can install any rom or cwm backup i.e. nandroid bacup..
Replysir i dont have anybackup so can u please give me a backup file
ReplyPlz download my [Modded]Micromax A25 Stock which is nandroid backup
ReplySir micromax-a27-clockworkrecovery Kaise Hoge........... Sir plz Help
Replysir i have tried installing it but it is showing installlation aborted
Replymy mobile is sitll not working
plzzzz help
tipu sir i am unable to extract clockwork.7z file using 7zip
Replyit is showing error
plzzz help
Did u download all files?
ReplyWHAT TO DO AFTER DOWNLOADING ALL FILES
Replyextract file no.1( remaining files will be automatically extracted)
Replysir i am unable to extract the files can u plz provide the extracted file on my email id :-vivekkamble1000@gmail.com
Replynandroid is around 600mb, not possible to upload..........BDW download all files and use 7zip. then extract clokwork.001.7zip file..
Replysir so can u plz upload a tutorial video of extractong the files and installing the stock rom
Replysir when i download u rall files and extract it it get a clockword file of 234mb but u said that it contains 600 mb i have tried this process 3 times whats my fault
Replyplzzz help
the " step 8: Attach usb to computer... SPFlashTool will show a dialog box showing downloaded and a green circle. Close the SPFlashTool."
Replynot working on my laptop why ???
i haven some trouble pls help me plzzz......????
subhu.thirus@gmail.com this is my mail id
sir when i download u r all files and extract it i get a clockword file of 234mb but u said that it contains 600 mb i have tried this process 3 times whats my fault
Replyplzzz help
may be u did not extract successfully....
Replyuse win 7 32bit
ReplyIn this week i will upload flashable stock rom for a25
Replysir when r u uploading the new stock rom
Replyand is it a nandroid backup plz reply
no......it is not nandroid backup....it is stock rom.....i will upload in this week
Replytipu sir..i read ur post about sp flash tool 8100 error..i tried installing my drivers again using pdanet n dat usb deview..bt still d error occurs when i click download..plz help..m stuck
Replytipu sir plz reply asap.. :(
Replysir so hw can i repair u r mobile
Replyplzzzz help......
Tipu sir, I can access the Clockworkrecovery by pressing volume up+power button, but I didn't do anything with SpFlash tool.
Replytomorrow i will upload stock rom
Replyuse another version of sp flash tool.....
Replyno u can't
Replycan that stock rom can repair my mobile.....
Replytipu sir r u going to upload the stock rom......
Replyand this rom can repair my mobile plzzz reply fast.....
@ Vivek Kamble: bro try this link..
Replyhttp://droidtricksqvga.blogspot.com/2013/04/micromax-a25-stock-rom.html
I have uploaded
ReplyWILL SP FLASH TOOL WORK ON WINDOWS XP
Replyyes it will work
Replyand mow my mobileis working perfectly
thanks to the anonymous and tipu sir....
thank you......
@ VIVEK KAMBLE: Your Welcome Bro..
Replyplzz... give me the link for the new stock rom
Replyhttp://droidtricksqvga.blogspot.in/2013/04/micromax-a25-stock-rom.html?showComment=1373778686553#c5619771920145754442
ReplyTipu bhai i still cant install this cwm it says partion erroe in the sp tool plz help me i m eagerly waiting to use ur cutom rom for a25
Replythanks in advance
hav u installed all drivers for it?
ReplyTipu sir when I try to connect my mobile it shows Eboot error . Installed the drivers in my pc
ReplyUsing windows 8. Plzzzzzzzzzzzzzzzzzzzz help as bcoz I m xcited 2 use ur vision
Hello Tipu, I have tried the way and it recognized my device but showed an error - 16008,"Partition size changed!". please help.
Replyi have tried in win8.....plz try it on win7
Replydid u disable da download all?
ReplyI do not have win 7 plzzzzzz help me tipu sirrr I need 2 flash cwm recovery to flash custom roms
Replydid u follow my driver installation procedure???
Replyhttp://droidtricksqvga.blogspot.in/2013/04/how-to-install-mtk-driver-in-windows.html...........If not then plz follow and try again
sir i use Ur all methods but not success . partition error still. i install driver ur mathod . but problem still. i use windows server 2003, XP, windows 7 32 bit. but problem not solved. pls give me any suggestion for " Partition size chenged " error.
ReplyPLEASE HELP ME.
Please mail me on mayur.mahajan7@gmail.com
Replyok
ReplyYa I have followed the steps still the same I even disabled da download all but then also showing Eboot error partition size changed
Replytipu sir please help... my micromax a25 is not getting flashed it is saying partition size change please elaborate here or at my email manvijvasu@gmail.com
Replytipu bhai please solve my problem. i use win xp, win 7 also win 8 (all 32 bit) " Partition size changed " error still. please help me. i tried all methods but not rooted successfully. please give me solution please please please. my email id is mayur.mahajan7@gmail.com
Replynot booting into recovery stucked on boot screen
Replyare yaar "DA Download" ko disable aur enable dono kar k dekh liya fir bhi ye process nahi ho raha aur drives bhi install kar rakhe hai, kya karu ab ??
ReplyCWM Installation For Rooted A25:
Reply1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from CWMR_6003_A25.zip to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
8. Your CWMR is now live...
Here is the link for cwm recovery.zip & mobileuncle tools.apk ...
http://forum.xda-developers.com/showthread.php?p=37281894
Phone rooted na ho to kya karu....??
ReplyYe flash ka process kese hoga ??
Brother, how many time need to recovery cwm by mobileuncle tool, please anybody help me. I have rooted but my cwm doesn't work. What can i do now? And i also delete my setting file from root. Please if any one know replay me on princepeal@gmail.com
ReplyI have flashed cwmr in my micromax A25. but i cant get to normal mode after that. when i reboot to normal mode it stuck with the micromax logo and i cannot get back to normal mode. I tried many times, but i cant get back to my normal mode. Can anyone help me to solve this issue?
Replyshit. when i click "download" it shows "Not ALL images are correctly loaded, which may cause boot up issue! Do you still want to go on downloading anyway?" what to do?
ReplyMicromax a25 not update signature verification failed how update
ReplyPost a Comment